Ninoma

Gekijouban Mahou Shoujo Madoka★Magica: Hangyaku ...Gekijouban Mahou Shoujo Madoka★Magica: Hangyaku no Monogatari - Akuma Homura - Kyuubey - 1/8 ...

Kjøp

Utgivelser

Made to order.

Order period: 2014/5/23 ~ 2014/7/28

Includes an alternative expression and opened wings.

Bilder

Loading...

© Aniplex / Stronger / Magica Quartet / Miyajima Katsuyoshi

Interessante kommentarer

2322 år sidenwaterbottlewaterbottle
I'm just gonna have to blindly preorder her without looking at the price. Ignorace is bliss.
1482 år siden (2 år siden)ponnieponnie ~Donyatsu Huntress~
I post it for those asking where to get her.

Those from USA, Canada, Central America, South America, Australia, New Zealand, United Kingdom, and Ireland can order her at Rightstuf. No pre-payment required.

Those living or residing in Japan till next year can order her at Aniplex+.
Those lucky enough to have a GSC partner shop in their area (mostly EU) can order her there.

The unlucky ones who have no options in the abovementioned categories are left with BiJ, NY, MBT and proxy orders. If you have an option for stores that offer her on a made-to-order basis, please, refrain from ordering her at BiJ and NY for the sake of the unlucky ones with no Aniplex retailers around.

Those who can't pre-order at Rightstuf or GSC partner shops and missed out on other shops that offered her to international customers can use forwarding service (e.g., BiJ or Tenso and the like) or a proxy of choice. There's a good guide if you don't know how forwarding order works. Also, the figure is made to order and unless Aniplex meets the limit earlier she can be pre-ordered till July 28.

Update! Those who missed out on her at BiJ and Nippon-Yasan and can't order at Rightstuf can still order her at Yokatta!

Se merKommentarer (2744)

02 dager siden (1 dag siden)lollipoperslollipopers
selling her for $160 sale #124359
03 dager sidenSkiaEshSkiaEsh
Contains_Anime (3 dager siden) #19278244I actually just received my custom cut rods in the mail on Friday so I can confirm they will still do it.

I just placed an order- I don't know why the person I contacted said they could not do custom lengths; maybe they were unfamiliar with the product and just told me what they thought.
03 dager sidenContains_AnimeContains_Anime
Halcione (5 dager siden) #19244612I filled out the order form from the same page I linked. In the length field I put "Other (specified in comments)", and when the comments came up, I put down how long I wanted them. They got back to me a bit later to confirm that a length outside their pre-sets would require an extra (small) fee, I accepted, and voila.
I'll be severely disappointed if they changed their stance on that. They're the only company that didn't ignore me completely :(


I actually just received my custom cut rods in the mail on Friday so I can confirm they will still do it.
05 dager sidenHalcioneHalcione
SkiaEsh (5 dager siden) #19228349I contacted Tap Plastics recently and whoever I got said they could not make custom plastic rods in that size. Did you email/call them at a specific email/number?

I filled out the order form from the same page I linked. In the length field I put "Other (specified in comments)", and when the comments came up, I put down how long I wanted them. They got back to me a bit later to confirm that a length outside their pre-sets would require an extra (small) fee, I accepted, and voila.

I'll be severely disappointed if they changed their stance on that. They're the only company that didn't ignore me completely :(
05 dager siden (5 dager siden)SkiaEshSkiaEsh
Halcione (25 dager siden) #18689537I took these before I got a rod for mine:
(mfc link)
(mfc link)
From what I've heard from others, my case wasn't even as THAT bad. Here are after rod photos for comparison:
(mfc link)
(mfc link)
The main point too look out for is her spine. It should be relatively straight. If yours looks fine, I'd recommend not fiddling with her or you might cause the lean, like it happened to me.
If it IS leaning, I got my rods from TAP plastics ([ext link ]). They were the only company I got a hold of that'd let me decide a custom length for the rods for a small extra fee. You want a rod length of 13cm, diameter should be relatively small like 8-10mm. The folks at TAP should be able to hook you right up with the needed rod.
Other than that, I recommend getting some foam pads for both ends of the rod to avoid scratching. I personally got some relatively large square ones off ebay and used scissors to get them the right size, you'll want to either get ones that are adhesive on only one side (the rod side), or double sided but keeping the protective paper on the side you're gonna prop her up with so she doesn't get all adhesive and stuff under there. I'd also recommend them being a bit on the thicker side so they really cushion her well and avoid the edges, I cut my pads a bit larger than the actual rod so there'd be excess draping over the edge for extra safety, but that might be overkill, not 100% sure :V
Then just put the thing in. You may need to place it at a bit of an angle due to the curved base, so it doesn't slide off, but it's not too hard :)


I contacted Tap Plastics recently and whoever I got said they could not make custom plastic rods in that size. Did you email/call them at a specific email/number?
06 dager sidentrashboat999trashboat999
FandomTrash (6 dager siden) #19204124if anyone decides to sell her for under $185 w/o a leaning problem, please PM me! I don't care about the condition o for the box or the plastic wrapping (as long as there is one).

pm'd!
06 dager sidenFandomTrashFandomTrash
if anyone decides to sell her for under $185 w/o a leaning problem, please PM me! I don't care about the condition o for the box or the plastic wrapping (as long as there is one).
013 dager sidenAlsoarAlsoar
Halcione (13 dager siden) #19001549I considered this approach too, but I backed off at the end. Since her dress is kinda uneven and at an angle, I didn't think it'd rest properly and could slide down and scrape itself. How did you manage? Is that spot on the dress even enough for this, or did you use plenty of padding, or even neither and I was just being paranoid? :x

I just stuck the stand into a dress gap and be done with it. It seemed to balance fine since it's across to where her pegs are. Her dress isn't slippery enough for it to slide off (hasn't slipped yet for the last half year and if it did, i don't think there'll be any damage)

I took some more pictures since it probably does a better job than my explanation.

http://s1.tsuki-board.net/image/600/Alsoar1489586972.jpeghttp://s1.tsuki-board.net/image/600/Alsoar1489586974.jpeghttp://s1.tsuki-board.net/image/Alsoar1489587023.jpeg
013 dager sidenHalcioneHalcione
Alsoar (13 dager siden) #19001170An alternative to supporting her buttocks is supporting her dress instead.
The dress on mine almost touched the ground, so i grabbed the support stand from Exelica since she didn't needed it.
I haven't had any issues for the last 6 months, so it seems to be working.


I considered this approach too, but I backed off at the end. Since her dress is kinda uneven and at an angle, I didn't think it'd rest properly and could slide down and scrape itself. How did you manage? Is that spot on the dress even enough for this, or did you use plenty of padding, or even neither and I was just being paranoid? :x
013 dager siden (13 dager siden)AlsoarAlsoar
An alternative to supporting her buttocks is supporting her dress instead.

The dress on mine almost touched the ground, so i grabbed the support stand from Exelica since she didn't needed it.

I haven't had any issues for the last 6 months, so it seems to be working.

http://s1.tsuki-board.net/image/Alsoar1489584243.jpeg

Se flere kommentarer

Community

Se merArtikler (18)

Se merRelaterte Klubber (7)

Se merLister (294)