Loading
HjemBloggerArtikkel #34653

Help! Lavi broke :,C

SolarstormflareSolarstormflare2 måneder sidenAsk MFC
So, after owning my limited & exclusive Lavi ITEM #518142 for less than 24 hours, I've managed to break him. I'm already upset as it is so please don't tell me I should have been more careful; I already know. I was trying to get him off his stand to fix the position of his hammer but he came off a bit quickly and landed on his side and his arm snapped off, which is awful. I've attached pictures. However I'm not in tears or anything because it can be re-attached, I'm pretty sure, with no sign whatsoever that it was ever broken, which is good. In fact, I just pushed the pieces back together gently and his arm is together again, fine? Probably because the edge is jagged, the friction is keeping it together or something? Anyway, I'd like a more permanent solution, and was thinking of using super glue or something? I live in Australia, so we don't have all of the U.S brands, but if anyone has advice, I'd appreciate it. Thanks!
[img]sta.sh/02akviv9...[/img]
[img]sta.sh/01xhb3z3...[/img]
[img]sta.sh/0rcrwk1y...[/img]
[img]sta.sh/010p2p0o...[/img]
1,188 treff • 14 kommentarer

Kommentarer14 kommentarer

1pt
I hope you fix him soon. c:
2 måneder siden
1pt
bambipie (2 måneder siden) #25865215Ive used it tho, as long as its compatible it works great.I've used it too and didn't have great results :/
2 måneder siden
1pt
DonkeyBlonkey (2 måneder siden) #25856129I don't think a plastic cement glue would work too well with PVC. Morely, an epoxy glue would work best.Ive used it tho, as long as its compatible it works great.
2 måneder siden
0pt
Solarstormflare (2 måneder siden) #25858921Oh, I see!! I watched the video, thanks for sharing! I had no idea this was a thing! Do you mind explaining what you mean by the joints shearing off? I might try and get that stuff from bunnings to try it out, although the guy in the video used a paperclip.

Unless you use a solvent based adhesive which physically fuses the polymer together (chemically melts the plastic and then sets it solid) any force applied to the parts can cause it to break at the point of contact. "Shearing" is simply a force applied perpendicular to a component causing it to fracture, in this case the join made with glue being weaker than the surrounding plastic.
2 måneder siden
1pt
Soarin (2 måneder siden) #25857768You should pin it before adding glue. A fine drill bit and craftsmans pin vise is what I would recommend. A 1mm hole about a half centimeter deep going through both ends would be enough to support any weight after you insert the aluminium or brass rod. It is a lot easier than it sounds, quite common amongst model makers and prevents the joints shearing off.
youtu.be/WQTsyE...
Oh, I see!! I watched the video, thanks for sharing! I had no idea this was a thing! Do you mind explaining what you mean by the joints shearing off? I might try and get that stuff from bunnings to try it out, although the guy in the video used a paperclip.
2 måneder siden
2pt
You should pin it before adding glue. A fine drill bit and craftsmans pin vise is what I would recommend. A 1mm hole about a half centimeter deep going through both ends would be enough to support any weight after you insert the aluminium or brass rod. It is a lot easier than it sounds, quite common amongst model makers and prevents the joints shearing off.

youtu.be/WQTsyE...
2 måneder siden
1pt
Thanks to everyone who helped, I really appreciate it!!!!
2 måneder siden
1pt
bambipie (2 måneder siden) #25844280Alternatively, you can use a hobby cement glue. Get it at any hobby/craft store. No mixing required.I don't think a plastic cement glue would work too well with PVC. Morely, an epoxy glue would work best.
2 måneder siden
1pt
Ceci (2 måneder siden) #25848627I think what aurybq is trying to say that the thing that broke is the connecting peg. Also looks like a clean break. An easy and simple fix. Plus side, there shouldn't be any visible damage after repairs.

Exactly what I meant. Thanks!
2 måneder siden
2pt
I think what aurybq is trying to say that the thing that broke is the connecting peg. Also looks like a clean break. An easy and simple fix. Plus side, there shouldn't be any visible damage after repairs.
2 måneder siden
Se flere kommentarer
Your source for old and rare figurines!

Om denne bloggen

 

More by SolarstormflareSe alle

Relaterte Varer 0

Tagger0

Relaterte Klubber 0