Loading
HjemKlubberClub #251

Take care of your figures!Take care of your figures!

Take care of your figures!
Hi there to you all!
Welcome to the "Take care of your figures" club!
You broke an accessory for your figure? You snapped a joint and you don't know ho to remove the part stucked in the hole? Your favourite figure have a terrible smudge on it? Here you can solve your problems and discuss about your experiencies!
You have also some interesting tips? Show them to us: you can help many friends or have the chance to improve your skills! :)
If you have any problem feel free to make a new topic in the forum (with some related pictures if you can) so we all can help you; check also the club's comments and leave yours too!

Most active club posts in the forum:
club/251/&p... About problems with Nendoroids neck joints;
club/251/&p... About figures cleaning sistems;
club/251/&p... About tranfert color smudges;
club/251/&p... About cold cast statues repairing sistems;

Please, feel free to join the discussions and say what you think or to open a new topic!

I really hope you can have a great time here on this club and on Tsuki-Board!!!
Oppdatert 2 år siden911 brukere137 kommentarer

Forum51

Kommentarer137 kommentarer

0pt
Hi,

I recently bought ITEM #61364 and unfortuately the base wasn't Max Factory's best choice as it does not provide enough support for such a hefty figure. I'm afraid that the pegs will eventually snap due to wobbling too much and I don't want her to turn into a "leaner".

I don't know anything about custom bases and it turns out that I'm not even creative enough to find an elegant solution... please help! Any idea is much appreciated.
3 måneder siden
0pt
Hi,

I messed up. So I recently got a Yu Narukami figma. As I was trying to tighten the hand for holding the katana, the heat from the hairdryer I was using seemed to warp the katana also. As a result I spent the last couple of hours trying to fix it, and it eventually snapped. I was wondering if anyone had a spare katana, similar to the figma? I'd really appreciate it.
3 måneder siden
0pt
Hello i dont know if this is the right place...while umpacking my Rem (ITEM #464666) i applied too much pressure on her plate that she is holding with the cup of tea and stuff, so it separated from her fingers and honestly if i place the plate on the top she can hold it just fine and you cant tell its separated, but still i would like to deal with it since i dont like the risk of it falling off randomly, so anyone have a broken Rem that could sell me that arm so i can replace it? i dont think using glue is possible since the fingers are so small and it would look too obvious that i would rather just let the plate on the top...
8 måneder siden
0pt
Heavenly_Otaku (1 år siden) #34191638Wash it with ordinary soap water. Do not scrub, just use your hands.
Thanks, worked de-sticky-ing another piece too.
1 år siden
0pt
Kam (1 år siden) #34188694Hiya.
I've been moving my figures over to a new room, and discovered my Fear has this.. sticky leaking plasticizer? (Dunno what else it can be, she's been in a Detolf all this time) on her hair..
What'd be the best way to clean it?

Wash it with ordinary soap water. Do not scrub, just use your hands.
1 år siden
0pt
Hiya.
I've been moving my figures over to a new room, and discovered my Fear has this.. sticky leaking plasticizer? (Dunno what else it can be, she's been in a Detolf all this time) on her hair..
What'd be the best way to clean it?
1 år siden
0pt
Heavenly_Otaku (1 år siden) #32621827

Thanks, if I remember it wasn't there when I got it fresh, the dent came due to the fall.\

I'll try what you suggested. Once again, thank you.
1 år siden
0pt
KapengBarako (1 år siden) #32461960
[img]imgur.com/E7boo.... jpg[/img]

It looks more like a dent, than a crack. Are you sure it wasn't there when you first got this figure? Even closeup on the picture, I don't see a crack line.
KapengBarako (1 år siden) #32517712 I figured it might be the paint from the skirt transferred to her skin.
So I tried qtips dipped with nail polish and warm water to try and remove it, neither worked.
So I figured would using Mr Clean's Magic Eraser work?
[img]imgur.com/a/Ex5...[/img]

Mr clean Magic eraser is a safe option when you use it gently. Since it is a microfiber abrasive, using it roughly might remove the neighboring paint as well. I suggest you to use undiluted Iso-propyl alcohol (Propanol) with q-tip to gently rub the paint transfer off. I recently did the same and it work well on skin of the figure.
1 år siden
0pt
Greetings, I'm here again though with another and hopefully easier too solve issue.

So I decided to admire my figurines a bit and I noticed my Alisa has something new to her. A red scratch...well seems like a scratch. I figured it might be the paint from the skirt transferred to her skin.

So I tried qtips dipped with nail polish and warm water to try and remove it, neither worked.
So I figured would using Mr Clean's Magic Eraser work?

[img]imgur.com/a/Ex5...[/img]
1 år siden
0pt
Heavenly_Otaku (1 år siden) #32344719... .

Apologies for the late reply.
Here's an image with a red circle as requested. Thanks for the previous advice as well.

[img]imgur.com/E7boo.... jpg[/img]
1 år siden
Se flere kommentarer
Official anime merchandise

Crew

Administrator(er)

Medlemmer911

Relaterte Bilder24

Relaterte Varer1