Loading
HjemDatabaseVare #464559
Buy from Japan. Easier than ever.

Kantai Collection ~Kan Colle~ - Iowa - Wonderful Hobby Selection - 1/8 - Half-Damaged, Heavy Armament Ver. (Max Factory)Kantai Collection ~Kan Colle~ - Iowa - Wonderful Hobby Selection - 1/8 - Half-Damaged, Heavy Armament Ver. (Max Factory)

Kantai Collection ~Kan Colle~ - Iowa - Wonderful Hobby Selection - 1/8 - Half-Damaged, Heavy Armament Ver. (Max Factory)
Kategori
Karakter(er)
Materiell(er)
Skala & Dimensjoner
1/8  H=135mm (5.27in, 1:1=1.08m)
Utgivelsesdato
10/18/2018 As Limited + Exclusive
Pris
Japansk70,125 treff • 132 kommentarer37 favoriter

Kjøp

Informasjon

Orders via Good Smile Online Shop can be placed between the 18th August 2017 (Fri) from 12:00JST until the 12th October 2017 (Thu) at 12:00JST.

Kommentarer132

Interessante kommentarer
67pt
Leopold (2 år siden) #13319211Iowa is going to make my collection great again!

https://farm9.staticflickr.com/8758/27891164843_13b05040c8_b.jpg
2 år siden
39pt
Iowa is going to make my collection great again!
2 år siden
Recent Comments
0pt
In stock @ Solaris Japan (¥29,532)

Brand New for ¥29,532
└ ✈ From Tokyo to your Home.
Pre Owned for ¥26,450
└ Check product page for item condition.
1pt
Selling used, $175. Displayed in a smoke-free environment out of sunlight. While attempting to remove an unideal special effect GSC added for a potential buyer upon their request, her bangs were untentionally given two minuscule scratches that cannot be seen unless you bring her inches from your face. Iowa otherwise is in absolutely perfect condition, never taken any falls or any damage. Please PM with email for extensive photos of the figure.
4 dager siden
1pt
sell for 235usd brand-new
ship from thailand pm me
20 dager siden
1pt
nothing (1 måned siden) #57246032Thx for your reply.
Attached please check the pic. I have tried my best to remove the white plastic on the shouder but still failed. Now I am wondering if i should take the part of the heard from the body, then I can remove that plastic. Have you tried took the figures apart?View spoilerHide spoilerhttps://static.myfigurecollection.net/image/nothing1555575304.jpeg


Mmmm, honestly at the moment I don't remember, since I took pics at her several months ago, but usually I prefer to cut plastic with scissors and pull it away.
If the head doesn't unmount easily, I suggest you to don't force it to avoid damages, and try as I told ^_^
1 måned siden
1pt
Thx for your reply.
Attached please check the pic. I have tried my best to remove the white plastic on the shouder but still failed. Now I am wondering if i should take the part of the heard from the body, then I can remove that plastic. Have you tried took the figures apart?MastraCustom (1 måned siden) #57245165Hi,
thank you so much for reading my review ^_^
About your question, if you mean the plastic behind the front hair part, it should be enough to unmount that part to remove plastic.
Did you try to take it off from the main part of the head?
Please post a pic if you can't do that, to let me understand well how to help you ;)
https://static.myfigurecollection.net/image/nothing1555575304.jpeg
1 måned siden
1pt
nothing (1 måned siden) #57240915Hello MastraCustom
I've read your review. And I found IOWA heavy armament ver. had some flaws. like the hair is strange looking from above.
Besides that, I cannot remove the plastic paper from the hair, would you mind give me some hint?


Hi,
thank you so much for reading my review ^_^
About your question, if you mean the plastic behind the front hair part, it should be enough to unmount that part to remove plastic.
Did you try to take it off from the main part of the head?
Please post a pic if you can't do that, to let me understand well how to help you ;)
1 måned siden
1pt
Hello MastraCustom

I've read your review. And I found IOWA heavy armament ver. had some flaws. like the hair is strange looking from above.

Besides that, I cannot remove the plastic paper from the hair, would you mind give me some hint?MastraCustom (6 måneder siden) #42357996Here is my review if anybody wants to take a look ^_^
mastracustom.co...
1 måned siden
1pt
MastraCustom (6 måneder siden) #43091206Yes, unfortunately it's correct :(
I wrote to GSC Customer Support asking for a replacement, here is their reply:
Paintwork is done partially by hand and therefore each product may
differ slightly and there is a limitation on the quality
The quality of all our stock is same as yours.
Your item is not defective but due to production limitation.
Consequently, we are not able to offer any support for your request.

Very frustrating for a Wonderful Hobby Selection :(
Thank you so much for taking a look at my review ^_^


If you had pushed hard with them they would had sent you those parts... I had to do be "rude" with them to receive replacement parts for my figmas.
3 måneder siden
2pt
Still looking for, if some won’t charge me “an arm & a leg” for
3 måneder siden
Se flere kommentarer